sBox portal1. Go to url
www.sboxcloud.com 
2. Tick create sBox account

3. Put like account wanted -:
a- First Name
b- Last Name
c- Email Address
d- Password
e- Repeat password
f- Tick receive if wanted any updated and new about sBox

4. After create account will see this dashboard
From dashboard can see how many sbox register and when last login

5. When go to edit profile look like this

6. When go to sBox terminal look like this

7. When go Change password look like this

8. This icon for logout sBox portal

9. Go back to sBox terminal for register 1 device(click add)

this show after click add
* = important need put
*please put
Serial NO:
Device Name:
IP Address/url(ipsbox):
After finish lick save

10. Now teach how to get the serial no for sBox
go to this url : ipsbox:port

11. login: admin & password :-null-

12. Go to device config-> Setting --> info version

13. now u can see here the serial no please copy this paste while add device in terminal sBox

Done for serial no part
14. sampel after done add device

15. now teach how to get the port no
must to do forwarding first from service port in virtual server in router to get port no

Here Virtual server

Create the 1 virtual server for 1 sBox ip device

service port
(service port this must need put same when while add device in terminal sBox at port no) = Service Port - The numbers of External Service Ports. You can enter a service port or a range of service ports (the format is XXX - YYY, XXX is Start port, YYY is End port).
Internal Port
(default is 80) - The Internal Service Port number of the PC running the service application. You can leave it blank if the Internal Port is the same as the Service Port, or enter a specific port number when Service Port is a single one.
IP Address
(sBox ip)- The IP address of the PC running the service application.
Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols supported by the Router).
Status - The status of this entry, "Enabled" means the virtual server entry is enabled.
Common Service Port - Some common services already exist in the pull-down list.
16. Here same sample after create 1 virtual server

17. Go back to terminal sBox in sBox portal
Here same sample

for this first times after all step above done
if want access by local network
just click the
public ip: 192.168.0.18618. This will show after click that blue colour(new tab will be open)

19. username: falco & password: 12345

20. Start to manage

21. Now teach how can access via outside network
same step from outside just go this url:/
http://www.sboxcloud.com/Login.aspx?Mode=Logout22. Login your account sBox portal

23. Go to sBox terminal device
create new 1
Serial No : can put anything as long have word
Device Name : follow the just 1 created (follow step 9)
Ip address : This must set wan ip network router
port no: follow what created at router setting(service port) (follow step 15)

24. How to get the the wan ip router network
Put this url at website(1pc) in office for sample(get the wan ip for router ) sbox just created have been there

25. Take this wan ip :
175.141.237.46 -put to ip address
26. After created
maybe can like this(click
public ip: 175.141.237.46 ) - use network outside

26. Appear like this(new tab)- start manage

27. Here some sample after created 1 device but can access local or from outside
